The Vortex High Country II Tripod Kit is an aluminum leg tripod with a 2-way pan head. The legs have 3 sections with flip lever locks. The head is single lever control and has an ARCA-SWISS quick release socket and plate, which allows for sliding the spotting scope back and forth to achieve optimum balance. This kit has a minimum height of 11.3" with the main section of the center column removed, a maximum height of 62.5", and a closed length of 24.3'. It weighs 4 pounds and has a maximum load of 22 pounds. There is a hook at the bottom of the center column for attaching a weight in windy conditions.
Included In The Box
-
Case
|
-
Quick-Release Plate with 1/4"-20 Thread
|
-
Rubber Packing Strap
|
-
Detachable Counterweight Hook
|
-
2.5mm Hex Wrench
|
-
1.3mm Hex Wrench
|
Vortex offers VIP warranty which stands for a
Very
Important
Promise to you, our customer. Optics are meant to be used outside - often times in the harshest environments imaginable. Couple that fact with "life" happening, and there's a lot that can impact your prized optical instruments. One thing is certain - from cliff drops to camp destroying brown bears and house fires to hurricanes,
Vortex will repair or replace your product in the event it becomes damaged or defective—at no charge to you. If Vortex cannot repair your product, they will replace it with a product in perfect working order of equal or better physical condition. The VIP warranty does not cover loss, theft or deliberate damage to the product.
You see, it doesn't matter how it happened, whose fault it was, or where you purchased it. You can count on the VIP Warranty for all Vortex Optics
scopes, rangefinders, binoculars, spotting scopes, tripods, and monoculars.
• Unlimited Lifetime Warranty
• Fully transferable
• No warranty card to fill out
• No receipt needed to hang on to
If you ever have a problem, no matter the cause, we promise to take care of you.